For screen reader problems with this website, please call618-242-15796 1 8 2 4 2 1 5 7 9Standard carrier rates apply to texts.
Easy one-cut, drop-in installation puts built-in audio within reach, with Perfect Fit templates, a precision flange, and (available) pre-construction brackets; achieve secure, vibration-free efficiency with a simple turn of the patented Rotating Cam system.
RCi speakers utilize the “virtual enclosure” of your in-wall and in-ceiling space to enhance their bass response and smooth low frequency blending with the midrange.
Lightweight and stiff blue polymer cones deliver excellent damping and bass response.
Durable, computer-modeled, injection-molded butyl rubber surrounds suppress unwanted cone resonances for a lifetime of reliable sound.
Aimable swivel tweeters for greater accuracy and more realistic imaging.
Polk’s proprietary, patented Dynamic Balance® technology allows our engineers to design out distortion-causing driver and system resonances, so you only hear the good sounds.
This technology uses laser measurement to ensure a smooth excursion path at either end of the volume spectrum for uniform performance at both low and high volumes.
Paintable grilles let you build them in, and then forget all about them; RCi Series speakers practically disappear into any room.
RCi Series speakers are timbre-matched to other Polk speakers to insure utterly seamless blending from speaker to speaker in systems that combine traditional and built-in speakers.
Rustproof stainless steel hardware, durable butyl rubber surrounds and powder coated aluminum (in-ceiling) & painted steel (in-wall) grilles make RCi Series speakers suitable for high moisture areas like bathrooms, transitional spaces or even under eaves or in the ceiling of an enclosed porch.
(RCi series are not suitable for exposed outdoor use. For outdoor speaker fun, use our Atrium® Series.)
|Tweeter Composition||Metal Dome|
|Midrange Composition||Mineral-Filled Polypropylene Cone|
|Speaker Type||In-Ceiling Speaker|
|Optional Accessories||(2) PB 55 Pre-Construction Bracket|
|Dimensions||9.625" (24.45 cm) h x 6.25" (15.88 cm) w|
|Total Frequency Response||67 Hz → 20,000 Hz|
|Nominal Impedance||8 ohms|
|Sensitivity (1 watt @ 1 meter)||90 dB|
|Lower and Upper -3dB Limits||70 Hz → 20,000 Hz|
|Frequency Response||67 Hz - 20,000 Hz|
|Manufacturer Warranty||Limited Lifetime|
|RMS Power Handling (Watts)||100|
|Maximum Power Handling (Watts)||100|